-
Archives
- February 2010
- October 2009
- April 2009
- March 2009
- February 2009
- January 2009
- December 2008
- November 2008
- October 2008
- September 2008
- August 2008
- July 2008
- May 2008
- April 2008
- March 2008
- February 2008
- January 2008
- November 2007
- October 2007
- September 2007
- July 2007
- June 2007
- May 2007
- April 2007
- March 2007
- February 2007
- January 2007
- December 2006
- November 2006
- October 2006
- September 2006
- August 2006
- July 2006
- June 2006
- May 2006
- April 2006
- March 2006
- February 2006
- January 2006
- December 2005
- November 2005
- October 2005
- September 2005
- August 2005
- July 2005
- June 2005
- May 2005
- April 2005
- March 2005
- February 2005
- January 2005
- December 2004
- November 2004
- October 2004
- September 2004
- August 2004
- July 2004
- June 2004
- May 2004
- April 2004
- March 2004
- February 2004
-
Meta
Daily Archives: November 22, 2006
Whirlaway
Today, I fixed the garbage disposal at the house we’re purchasing. The symptoms of its problem were that it would hum when you flipped its switch, and after a couple of seconds, the reset button would toggle. It wouldn’t spin at all. I researched disposals and found that this usually means that something’s keeping the flywheel that drives the rotation from moving. Nobody’s lived in this house for a year, and I guess the owners left some junk in the disposal when they left. After doing my research, I checked, and, sure enough, there was lots of brown crud caked all into the inner workings of the disposal as seen from above.
Typically, when you need to loosen the flywheel, you stick an allen wrench up in a hole devised for the purpose and turn until the wheel loosens enough to let the thing spin. Then you pulse the switch to fling out whatever the obstruction was. But Whirlaway units (the brand installed at my new house) have no hole for this purpose. When I called the manufacturer to find out more about how to fix the thing, they told me that the preferred way of fixing this issue is — get this — to jam a broomstick down into the disposal and try to get leverage enough to loosen the wheel. Whaaa?
I tried that technique yesterday, applying enough force to bend (not in a damaging way) the stainless steel sink, to no avail. The manufacturer today suggested WD-40, and I sprayed the better part of a can of that down the disposal today trying to eat away at some of the gunk in hopes that it was corrosion rather than food. That cleaned things up a bit but didn’t solve the problem. So I attacked it with some Drain-O. Which still didn’t solve the problem. At this point, I summoned my inner brute once again and applied more force with a paint roller extender (in lieu of a broomstick). The aggregate effect of the chemicals and my own manly labors with the extender did the trick, and I finally got the flywheel to move.
And that’s how you fix a Whirlaway disposal.
powered by performancing firefox